AHCG Air Handlers
PDF | Print | E-mail
AHCG Commercial Air Handlers
Designed specifically for use with commercial split system A/C condensing units, these air handlers can be installed horizontally or vertically as supplied from the factory. Field piping connections are made through a fixed post between two side access panels on either side of the unit, allowing full accessibility after the installation is complete.
All models come with dual circuit manifold for dual condensing unit application; fittings are provided for single condensing unit application.
The AHCG Series is designed for environmentally friendly R-410A.
All models are dual voltage, 208/230-3-60 and 460-3-60.
Features
Low Profile—Unit can be mounted in most drop ceiling areas or in conditioned space so no separate equipment room is needed
Installation Flexibility—Can be installed horizontally or vertically as supplied from the factory
Durable Cabinet—Cabinet is galvanized steel with powder coat paint finish and is insulated to reduce sound transmission
Filters—1" disposable filters are standard, but the filter rack can handle 1" and 2" filters
Drain Pan—Made of zinc-coated galvanized steel and designed to trap condensate in both vertical and horizontal installations; drain connections are located on both sides of the unit for field flexibility
Evaporator Coil—Constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer
Service Access—Two removable panels on the top and each side provide access to motors, blowers, sheaves and filters
Accessories
A full range of accessories is available. Contact factory.
