RSG Split System A/C
PDF | Print | E-mail
RSG Series Commercial Split System A/C
The RSG Series split system condensing units are designed to let you match components to the specific requirements of the job for maximum efficiency. With the condensing unit located outside and a low profile air handler installed in the ceiling or conditioned space, there's no need for a separate equipment room.
The RSG Commercial Series is efficient, quiet, and simple to install, and available in sizes ranging from 77,000 to 244,000 BTUH/6 to 20 tons. Units are precharged with R-410A, the environmentally friendly refrigerant.
RSG Condensing Units are designed to be used with our AHCG Series commercial air handlers for efficient air conditioning. By mixing and matching these components, the contractor is able to meet the actual requirements of the job, eliminating the use of under- or oversized equipment. Installation is simplified with removable panels and externally located sweat connections.
Features
CABINET—Galvanized steel with powder coat paint finish. The unit is of frame and panel construction, which allows access panels to be opened or removed without affecting the structural integrity of the unit; stamped louver panels offer protection for the condenser coil
BASE PAN—Galvanized steel with powder coat paint finish
COMPRESSORS—The scroll compressor is hermetically sealed with internal high temperature protection, and durable insulation on the motor windings and are mounted on isolators to reduce vibration and noise transmission to surrounding areas; models -125 through -240 have tandem scroll compressors
CONDENSER COIL—Constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities
REFRIGERANT CONNECTIONS—Fixed panel is used for field piping connections, allowing removal of access panels without disturbing connections
LOW AMBIENT CONTROL—A pressure sensitive fan cycling control allows operation down to 0° F.
SERVICE VALVES—Standard on liquid and suction lines, isolates the outdoor unit from the indoor units for easier serviceability
SERVICE ACCESS—Condenser fan motors are mounted on removable top panels, exposing the entire condenser coil for cleaning.
CONDENSER FAN MOTORS—Direct drive permanently lubricated PSC motors with inherent thermal overload are accessed by removing the wire grilles
Crankcase Heater—Minimizes refrigerant migration into the compressor oil
Filter-Drier—Included to ensure cleanliness of refrigerant
Accessories
Contact factory for accessories.
